The OSA-30L is a robust X-ray generator designed for NDT laboratories in the oil and gas industry requiring extended operational capability and enhanced diagnostic precision. It combines the powerful output of the OSA-30 platform with an optimized focal spot geometry, resulting in sharper imaging and improved defect detectability in critical pipeline weld joints.
The unit excels in applications involving detailed girth weld inspection, casting analysis of valve bodies, and advanced characterization of materials used in sour service and high-pressure environments typical of Middle Eastern oil and gas operations.
| Model Technical Specifications: | ||
| X-ray generator model L – mini housing. | OSA-30L | |
| X-ray tube model (material) | XT5 (D) ceramic | |
| Radiation beam (directed) | actual angle 40º × 60º | |
| Tube voltage (kV) | 130 ÷ 300 | |
| Tube current (mA) | 4 to 5 | |
| Focal spot (mm) | 2.5 × 2.5 | |
| Cooling | air | |
| Power supply | AC 190V–260V / 50Hz | |
| Power (kW) | 3.0 | |
| Weight (kg) | X-ray radiation generator | 22 |
| Control unit | 9 | |
| Dimensions (mm) | X-ray radiation generator | Ø 240 × 630 with handles |
| Control unit | 290 × 165 × 300 | |
| Exposure delay time (min) | 0 ÷ 3 (step 6 seconds) | |
| Penetrating capacity Fe (mm) Agfa | AGFA: D7 = 50, F8 (NDT1200) ≥ 75 | |
| Operating temperature range | -30ºC ~ +40ºC | |
| OSA-30L Delivery Set: | |
| X-ray radiation generator 300 kV | 1 |
| Control unit / Remote control with 50 m range | 1/1 |
| Frost-resistant interconnection cable 20 m | 1 |
| Power cable 10 m | 1 |
| Grounding cable 5 m + steel spike | 1 |
| Generator handle set (4 pcs) | 1 |
| Magnetic signal lamp 24V + charger | 1 |
| Black bag / Tightening strap 3.5 m | 1/1 |
| Transport case | 2 |
| Passport / Operation manual | 1/1 |
| Warranty card (12 months) | 1 |
| Customs Union Declaration of Conformity | 1 |
The generator’s design allows for inspection of hard-to-reach welded joints, such as elbows, tees, reducers, flanges, and others.
The OSA series generators have a ceramic X-ray tube made of German materials with an opening angle of 40 to 60, which allows for inspection of a welded joint in just three exposures.
The use of SF-6 gas as an insulator in the equipment design allows for work in any plane.
The equipment is designed for a wide range of operating temperatures—from -40°C to +50°C.
The equipment is assembled from high-quality German and Japanese components and has a modular design. As a result, you receive fast and high-quality service. Components are always in stock.
and we will prepare a commercial proposal for you tailored to your specific case.